Click on the Product Title to learn more about an individual item.
High Pressure Aromatic Polyurea Hybrid
Pure Coat 8550
Pure Coat 8550 Aluminum is a fast set, rapid curing, flexible, aromatic, two component spray polyurea hybrid. Intended for use as a spray applied protective roof coating for use over concrete, metal, polyurethane foam and smooth built-up roofs. Can also be used over various single-ply membranes. More Info...
Mixing Ratio by volume
Gel Time
Shore Hardness
Tensile Strength
Elongation @ Break
Tear |
1:1
25 - 30 Seconds
85 +/- 5 Shore A
1750 +/- 300 psi
250 +/- 15%
200 +/- 20 pli |
Elastomeric Asphalt Emulsion
Eco Tight Daclar
Eco Tight Daclar™ is a modified elastomeric asphalt emulsion specifically formulated as a spray applied roof coating. Eco Tight Daclar™ is part of a dual component system that is applied using a specifically designed spray applicator. The technology advances in Liquid Rubber Daclar™ give a quick setting coating membrane that is solvent free and has excellent strength, elasticity and adhesion. Eco Tight Daclar™ is an environmentally friendly roofing product which can be applied indoors and outdoors with no specialized protective equipment. More Info...
Mixing Ratio by volume
Specific gravity (liquid) g/cm3
Odour
VOC
Solids (wt)
Viscosity, SSF @ 25°C, seconds
pH |
12:1
Approx. 1.0
None
Contains no solvents
57-62
15-20
10-12 |
Eco Tight Voxlar
Eco Tight Voxlar™ is a modified elastomeric asphalt emulsion specifically formulated as a trowel grade product where a watertight seal is requird. It is suitable for use with building fixtures, pipes, walls and roofs. Eco Tight Voxlar™ is a single component product that may be cold applied be applied by trowel, brush or squeegee. More Info...
Specific gravity (liquid) g/cm3
Odour
VOC
Solids (wt)
Viscosity, Brookfield, sp.#5, 20 rpm
pH |
Approx. 1.0
None
Contains no solvents
63-68
20000-30000
10-12 |
Eco Tight Zavlar
Eco Tight Zavlar™ is a high viscosity modified elastomeric asphalt emulsion specifically formulated to be applied by roller, brush or squeegee. Eco Tight Zavlar™ is a cold applied single component product designed for a wide range of protective coating applications including rust protection of ferrous materials and is also of value for noise and vibration dampening. The product technology employed in Eco Tight Zavlar™ provides a solvent-free, quick setting coating that yields a membrane with excellent strength, elasticity and adhesion. More Info...
Specific gravity (liquid) g/cm3
Odour
VOC
Solids (wt)
Viscosity, Brookfield, sp.#5, 20 rpm
pH |
Approx. 1.0
None
Contains no solvents
53-58
8000-9000
10-12 |
Waterborne Acrylic Elastomer (Cool Roof)
Ultra Flex 1000
Ultra Flex 1000 is a high-solids, heat-resistant, single-component water-borne acrylic elastomeric coating. Ultra Flex 1000 is formulated to have excellent adhesion to polyurethane foam as well as other properly prepared construction surfaces. Ultra Flex 1000 acrylic elastomeric coating has numerous applications in a number of different environments from exterior paint applications to roof coatings. More Info...
Dry Time
Full Cure
Shore Hardness
Tensile Strength
Elongation
Tear |
Dry to the touch in 4 hours
Final cure in 30 days
72 Shore A
350 psi
220%
130 pli |
