Pinnacle West Spray Foam and Coatings Specialists Since 1998 Like Us On Facebook. Follow Us On Twitter. Visit Our YouTube Channel.
Graco Top 20 Distributor

Free Shipping on orders over 50$

  • Your cart is empty

    You have no items in your shopping cart.

WireTrim® Pro Line

SKU: 10.100.01

Availability: Order Online or by Phone at 1-800-901-0088

$17.35
  • Buy 4 for $15.50 each and save 11%
  • Buy 10 for $14.20 each and save 19%
OR

Quick Overview

ProLine Wire Tape is a double sided paper tape that offers excellent body and feel and withstands the rigors of prep work making it the solid choice for the professional applicator.

WireTrim® Pro Line

Zoom Out
Zoom In

Details

ProLine WireTrim® double-sided paper tape offers excellent body and feel and withstands the rigors of prep work making it the solid choice for the professional applicator. The aggressive adhesive holds the wire tight to the surface, minimizing the risk of material bleeding under the tape. 100 ft. per roll.

ProLine double-sided edge-cutting tape, known for its high-tack, co-polymer adhesive that sticks instantly while allowing for unlimited repositioning to trim virtually every type of spray-on truck liner. ProLine can be used to trim everything from medium durometer polyurethane, applied with a low pressure spray system at room temperature, to high durometer polyureas, applied with high pressure at extreme temperatures. Pro Line tape was developed to perform perfectly with a fine paper tape enabling access to the filament by hand-tearing the tape and a permitting the filament to glide through the trim tape and coating without pulling the wire tape away from the surface prematurely.

The fine crepe-paper body of Pro Line WireTrim® tape allows the applicator to hand tear the paper tape manually and position the cutting filament around curves and irregular surfaces with ease. The unique thickness and body of ProLine Wire tape enables precise placement and conformity to nearly any shape or surface. The high-tack adhesive also serves to hold the tape in place while sanding or scuffing along the edge and will keep the filament edge tight to the substrate surface, eliminating a spray on coating from bleeding underneath the cutting edge.

Tape Paper Double Sided
Adhesive High-Tack
Filament .010” Diameter Wire (Heavy Duty)
Length 100 Feet per Roll
Width 1/4 Inch

Over the past ten years, WireTrim® Edge Cutting Tape has transformed the spray-on truck bed liner industry, making the previously tedious and intricate trimming process an extremely fast and painless experience.

Tips for using WireTrim® Pro Line Tape

Application:

  • Before laying out the edge cutting tape make sure the area to be masked is clean and free of dirt, tar, and other contaminants.
  • Be sure to leave approximately 6 inches of extra tape at both ends of the wire tape to be used as handles to start cutting the edge of the liner.
  • For long straight runs, first attach the wire tape at your starting point. Unroll enough edge cutting tape to reach the end of the straight run and TUG the tape, putting only enough tension to straighten the line as you slowly begin to attach the other end to your end point (this TUG action will create a perfectly straight line as you hover about 3-5" above the end point). Now the wire tape should be lightly stuck to the surface with the option to re-lift and try again and again. Once the wire trim tape placement is satisfactory, proceed by TAPPING the wire tape down gently every 12" with your fingertips. Do not brush before TAPPING or the wire tape may move! After tapping wire tape in position, run your finger down the line to secure wire tape.
  • For clean corners be sure to stretch the edge cutting tape around the corner to prevent any material bleeding under the tape.
  • Try to use one long run of wire tape rather than short runs (example: Use one piece of wire tape around the outside of the tailgate rather than 4 separate pieces one for each side) This cut downs on the amount of wire tape required and makes for cleaner corners and faster unmasking.

Removal:

  • Pull cutting wire at approximately 45 degrees into bedliner (for uniform beveled edge) and at 45 degrees in towards the cut line.
  • After cutting edge, SLOWLY remove adhesive tape body from substrate. Rapid removal may result in tape residue left on substrate.

Caution

All wire tape and filament bearing products contain fine cutting wire. Handle with care and always wear suitable protective equipment.

Review by Auto-Thrill

Rating
(Posted on 3/14/16)

Nice clean lines

Easy to use, leaves very clean lines. Will leave residue from time to time but very easy to clean up with wax and grease remover.

Review by John

Rating
(Posted on 2/11/16)

Wire Tape

Amazing product, works great for running curved lines unlike the plastic stuff. Plastic tape wire seams to pull a little more. In turn not getting clean curved lines. This product leaves resin that needs cleaned from time to time, but good for lines.

Review by Mike

Rating
(Posted on 3/9/15)

Awesome product

Have been using this for almost 10 years! The best and handiest product you can have around!

Add Your Review

If you would like to add a review please log in to your account or register for a free account.

Use spaces to separate tags. Use single quotes (') for phrases.

Compare Products

You have no items to compare.

Have questions, call us toll free at
1-800-901-0088

  • Quality Products
  • Rewards Program
  • Technical Support
  • Easy Return Policy
  • Massive Selection
  • Fast Shipping